Crane specification LK-75tm-V400 sno 1524:
– Knucle boom slewing crane.
– Hydraulic telescope at jiib.
– Hydraulic swivel in centre of crane allows infinite slewing operations.
– Epoxy coated cylinders with piston rod in hardened acid proof steel.
– Fittings and tubes in stainless steel AISI 316L.
– Operation valve prepared for radio control installed in watertight box at pedestal
The crane is equiped with :
* Winch type MV-5,0-AHB
* Operation valve type Hawe PSV proporsjonal electrical activated.
* Operation valve installed in watertight box at pedestal
* Over centre valves and safety valves.
* All fittings and tubes in stainless steel AISI 316L.
Reach : – max reach : 15 m
SWL : – 5,0 ton at 15 m
Slew : – Moment : SWL at 10 degrees
Range : infinite
Crane classification:
– Crane classified as service crane by NMD notified body.
– Crane certified as shipboard deck crane at max reach 15m and 5 tonnes SWL.
– Crane certified by NMD notified body for buoy handeling operation with 2,9 tonnes
load and in 3,5m significant wave heights with a reach of 15meter.
5 tonnes load at 8,5meter at same conditions.
1 off Electrohydraulic 75 W integrated to crane king post:
– HAWE pump type V30E-160cc, variable pump, open Load Sense system.
– Max output regulator limited to 75kW;
max flow 280litres/min, max pressure 320bar, w/1775 rpm.
– Electromotor BEVI 2D-280S 440V/660V, 88kW, 60hz, 1775 rpm.
– 1 off Oil cooler type Emmmegi air.
Tank, approx 450 l. with level and temperature sensors, closing valve,
returnfilter and looking-glass.
– YD starer; YD starter in switch box.
– Aggregate delivered intergrated to crane post.
Crane winch :
1 off crane Winch type MV-5,0-AHB in aluminium and stainless steel with automatic
hydraulic brake:
– Dimensions of drum:
D = 600 mm
d = 360 mm
L = 300 mm
Pull 2. layer of drum : 5,0 ton at 260 bar
Hoisting speed 1. layer of drum : 60 m/min at 160 liter/min
Capasity Ø 22 mm rope/wire : 34 meter on 2.layer
Pull and capacity at 3.layer is 4,5 tonnes and 54m of 22mm wire
1 off Radio control type HBC type FST 719:
– Radio control with all crane functions on joysticks.
– Delivered with: -transmittor, -carrying strap, -2 batteries, -charger 24V,
– Receiver, -antenna, -wiring diagram and user manual.
1 off crane pedestal for 75tm crane sno 1524:
– Steel crane pedestall, length 2 m.
For technical drawings, please reach out via email. Technical drawings, operation manuals, installation manuals and certificates will be forwarded.
Our client may be contacted, for planning transport and reassembly.
The item has a reserved price, but all bids will be considered.